Table of Contents

bluetooth no audio

audio.conf

Cyanogen Mod 6.1.2 default

# Configuration file for the audio service
 
# This section contains options which are not specific to any
# particular interface
# NOTE: Enable=Sink means that bluetoothd exposes Sink interface for remote
# devices, and the local device is a Source
[General]
Enable=Sink,Control
Disable=Headset,Gateway,Source
 
# Do not require master role for incoming connections
Master=false
 
# SCO routing. Either PCM or HCI (in which case audio is routed to/from ALSA)
# Defaults to HCI
#SCORouting=PCM
 
# Automatically connect both A2DP and HFP/HSP profiles for incoming
# connections. Some headsets that support both profiles will only connect the
# other one automatically so the default setting of true is usually a good
# idea.
#AutoConnect=true
 
# Headset interface specific options (i.e. options which affect how the audio
# service interacts with remote headset devices)
#[Headset]
 
# Set to true to support HFP (in addition to HSP only which is the default)
# Defaults to false
#HFP=true
 
# Maximum number of connected HSP/HFP devices per adapter. Defaults to 1
#MaxConnections=1
 
# Just an example of potential config options for the other interfaces
[A2DP]
SBCSources=1
MPEG12Sources=0
 
[AVRCP]
InputDeviceName=AVRCP